MinistAIR-250

HRU-MinistAIR residential heat recovery units are a new version of a well-recognized model based on a completely new design. Air flows at a speed of 250 or 325 m3/h and a self-supporting shell from EPP, which simultaneously acts as thermal insulation and acoustic insulation. Counterflow heat exchangers made of PET are responsible for heat recovery and enthalpic heat exchangers (E) for moisture recovery. In addition, the built-in RH sensor will take care of the humidity level in the building. Left and right versions together with horizontal installation will allow you to adapt the device to almost every project. In addition, the 56 cm width will allow installation in narrow spaces or closets.

Wireless communications are used, like the other series, for both controllers and IAQ sensors. Control is also possible with the help of a mobile application.

Key performance features:

Heat recovery: up to 96%

Installation in 3 configurations - on the wall: vertical, horizontal and standing on the floor

Left and right units (mirror image of connections)

Horizontal model for both left and right configurations

Two condensate drains. When designing slopes in EPP, excess water can flow freely to the sewer connector

Changing the filters is easy without opening the cover

Compact dimensions. The width of the device is only 560mm. The units can be installed in standard 600 mm cabinets thanks to these dimensions

Modulated bypass

Free cooling functions - also called passive cooling (no energy required) or night cooling (mainly takes place at night) can be used to cool the building with outside air when the room temperature is higher than the outside temperature

Free heating functions - also called passive heating (no energy required), can be used to heat the building with outside air when the room temperature is lower than the outside temperature

Performance tested according to EN 13141-7 standard

Wall mount stands and legs included

Interchangeable channel connections

Wireless control via mobile application or web browser

Remote control is possible with any CO2 or RH wireless sensor

Light construction - only 25 kg!

Easy access to USB port (service interface)